Woodstock SHOP FOX W1758 Spezifikationen PDF herunterladen (Seite 29)

-27-

W1758 Owner's Manual (Mfg. Since 3/10)





Since all bearings for the Model W1758 are

sealed and permanently lubricated, simply

leave them alone until they need to be

replaced. Do not lubricate them.

Wipe a lightly oiled shop rag on the outside

of the headstock spindle. DO NOT allow any

oil to get on the inside mating surface of

the spindle.

Use the quill handwheel to extend the

tailstock quill all the way out, and apply

a thin coat of white lithium grease to the

outside of the quill. DO NOT allow any

lubricant to get on the inside mating sur-

face of the quill.

Cleaning the Model W1758 is relatively easy. Vacuum

excess wood chips and sawdust, and wipe off the remain-

ing dust with a dry cloth. If any resin has built up, use a

resin dissolving cleaner to remove it.

Remove any debris or oily substances from the inside of

the spindle and quill.



Regular periodic maintenance on your machine will

ensure its optimum performance. Make a habit of

inspecting your machine each time you use it.





 Loose mounting bolts.

 Worn switch.

 Worn or damaged cords and plugs.

 Damaged V-belt.

 Any other condition that could hamper the safe

operation of this machine.



     

   







Protect the unpainted cast iron lathe bed by wiping it

clean after every use—this ensures moisture from wood

dust does not remain on the bare metal surfaces. Keep

your lathe bed rust-free with regular applications of qual-

ity lubricants.



To disassemble the tailstock for cleaning, loosen the set

screw above the handwheel, then completely unthread

the handwheel from the threads of the quill. Except for

the live center, thoroughly clean all of the unpainted

parts with mineral spirits and apply a thin coat of light

machine oil to these surfaces.

When re-assembling the tailstock, thread the handwheel

back onto the quill, tighten down the set screw that

secures it, then back the screw off one full turn so that

the handwheel can freely rotate.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Woodstock SHOP FOX W1758 Spezifikationen Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drehmaschinen Woodstock SHOP FOX W1758