Woodstock SHOP FOX W1758 Spezifikationen PDF herunterladen (Seite 25)

-23-

W1758 Owner's Manual (Mfg. Since 3/10)



 Install the live center into the tailstock quill, and

lock the quill in place with the quill locking lever

(refer to on for

instructions).

 Slide the tailstock toward the workpiece until the

point of the tailstock center touches the workpiece

end center mark, then secure the tailstock in place

with the tailstock locking lever.

 Loosen the quill locking lever and rotate the quill

handwheel clockwise to push the tailstock center

into the workpiece at least

⁄4".

 Position the tool rest approximately

⁄4" away from

the workpiece, and approximately

⁄8" above the

workpiece center line (see ).

 Before turning the lathe ON, rotate the workpiece

by hand to ensure that there is safe clearance on all

sides.



• When turning the lathe ON, stand away from the

vertical path of the spinning workpiece until the

lathe reaches full speed and you can verify that the

lathe will not throw the workpiece.

• Usetheslowestspeedwhenstartingthelathe.

• Selecttherightspeedforthesizeoftheworkpiece

you are turning:

— Use the slower speeds for large workpieces of

diameters of 4" and over, and for rough cutting.

— Use the middle range speeds for workpiece diam-

eters of 2–4".

— Use the faster speeds for workpieces under 2", and

for finish turning.

• KeeptheturningtoolonthetoolresttheENTIRE

time that it is approaching the workpiece and it is in

contact the workpiece.

• Learnthecorrecttechniquesforeachtoolyouwill

use. If you are unsure about how to use the lathe

tools, read books or magazines about lathe tech-

niques, and seek training from experienced and

knowledgeable lathe users.

Workpiece

Center Line

Distances

Tool Rest

 Relative position of tool rest to

workpiece.

Tool Rest Height







































1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Woodstock SHOP FOX W1758 Spezifikationen Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drehmaschinen Woodstock SHOP FOX W1758