Woodstock SHOP FOX W1758 Spezifikationen PDF herunterladen (Seite 26)

-24-

W1758 Owner's Manual (Mfg. Since 3/10)





Faceplate turning is when a workpiece is mounted to the

faceplate that, in turn, is secured to the headstock spin-

dle. This type of turning is usually done with open-faced

workpieces like bowls or plates (see ).





 Mark the center of the workpiece back, as in 

on .

Cut off the excess corners of the workpiece to

make it as close to "round" as possible.

 Use the mark made from to center the face-

plate on the workpiece back, and attach it with

wood screws that do not have tapered heads (see

).

 Thread and secure the faceplate onto the headstock

spindle (refer to on  for

detailed instructions).

If wood screws cannot be placed in the workpiece, then

the faceplate can be mounted to a backing block that is

securely glued to the workpiece.





 Make the backing block from a piece of scrap wood

that is flat on both sides, and is free of knots and

splits.

 Locate and mark the center of both the workpiece

and the backing block.

 Drill a

⁄4" hole completely through the backing block

at its center.

 Looking through the hole in the backing block to line

it up with the center of the workpiece, glue and

clamp the backing block to the workpiece.

Allow the glue joint to completely cure

according to the manufacturer's instructions.

 Typical faceplate turning

operation.

 Typical attachment of

faceplate to workpiece (shown with

backing block).

Correct Incorrect

 Correct and incorrect

screw types for mounting faceplate to

workpiece.

NOTICE



   Figure 32 

 

      

     

      



Faceplate Turning

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Woodstock SHOP FOX W1758 Spezifikationen Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drehmaschinen Woodstock SHOP FOX W1758