Woodstock SHOP FOX D2267 Bedienungsanleitung PDF herunterladen

Dust Collection Nozzle

D2267

Assembly:

1. Threadthe(3)M8-1.25x25Feetintothebottoms

ofthe(3)Legs.

2. Using the (12) M6-1 x 8 Phillips Head Screws,

6mmLockWashers,and6mmFlatWashers,attach

the (3) Legs to the Main Tube Body. Be sure the

LockWashersarebetweentheFlatWashersandthe

PhillipsScrewheadswhentighteneddown.

3. Thread the M8-1.25 x 20 Lock Knob into the

threadedholeonthesideoftheMainTubeBody.

4. Attach the Fixed Support to the top end of the

Silver Main Tube Body using (2) M6-1.0 x 20

PhillipsHeadScrews.

5. ThreadtheM10-1.5 Hex Nutonto the endofthe

M10-1.5 x 15 Lock Knob. Place the end of the

LockKnobandHexBoltassemblythroughtheslot

ontheVacuumTube.Aftertheknobhasbeenslide

through the slot, place the 10mm Flat Washer on

thethreadedendoftheKnob.

6. CarefullythreadtheKnobintothethreadedholein

the Fixed Support. Be sure the Flat Washer is

betweentheFixedSupportandtheVacuumTube.

ThisWasheractsasapivotpointwhen adjusting

the Nozzle position. Tighten the Knob until the

VacuumTuberemainsstationary.

7. SlidetheNozzleintotheendoftheVacuumTube.

TheNozzlecanberotated360°withintheVacuum

Tube. Thread the M6-1 x 15 Lock Knob into the

threadedholeonthetopoftheVacuumTube.This

KnoblockstheNozzleintoposition.

8. Youarenowreadytoenjoydustcollectioninjust

about any location of your shop. If the Stand is

unlevel, thread the Feet in and out until proper

adjustmentisachieved.

If You Need Assistance:

We hope you will find that your Shop Fox

 Model

D2267iseasilyassembledandputtouse.Shouldyou

haveany questions aboutthisproduct,please contact

thedealerwhereyoupurchasedit,oryoucancontact

theWoodstockInternationalTechnicalDepartmentat

1-360-734-3482,MondaythroughFriday,betweenthe

hoursof7:00amto5:00pmPSTore-mailusat:

[email protected]

Wear safety glasses during

the entire assembly

process. Failure to comply

may result in serious

personal injury.

Be sure to read the entire instruction sheet

before beginning the construction of this prod-

uct. Follow every step and use the recommended

tools and supplies. Also, read the instruction

manuals for any tools you are using to complete

this project. Be certain that the tools used for

this installation are intended for the task which

will be performed. Failure to do this could result

in serious personal injury.

TheShopFox

D2267isdesignedtopositionthesuc-

tionofyourdustcollectornearmachinesthatarenot

equipped with dust ports and near other sources of

woodchips.Thenozzleisattachedtoafullyadjustable

stand that permits an endless combination of nozzle

positions.

Tools Needed:

PhillipsScrewdriver

NOTICE

The performance of your Model D2267 will

only be as good as the performance of your

dust collector. Regular maintenance of

your dust collector will ensure maximum

performance from your Model D2267, with-

in the limitations of your dust collector.

1 2

Inhaltsverzeichnis

Seite 1 - Dust Collection Nozzle

Dust Collection NozzleD2267Assembly:1. Threadthe(3)M8-1.25x25Feetintothebottomsofthe(3)Legs.2. Using the (12) M6-1 x 8 Phillips

Seite 2 - REF PART # DESCRIPTION

Kommentare zu diesen Handbüchern

Keine Kommentare

Woodstock SHOP FOX D2267 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Woodstock SHOP FOX D2267 herunter. Woodstock SHOP FOX D2267 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Woodstock SHOP FOX D2267